Skip Navigation Links


FERROLI Boilers

Ferroli Boilers an experience of more than 50 years offering more solutions in comfort, in which the floor standing boilers have been the main gas and oil protagonist: the product that better represents the high levels of research, quality, competitiveness and service; the product that has turned to us into leaders. Ferroli is the world’s largest Italian manufacturer of Heating and Air Conditioning equipments. The manufacturing system and quality tests employed by Ferroli over the years have lead to increasingly reliable and safe products; mainly Cast Iron Boilers and Radiators. Ferroli produces high efficiency Boilers ranging from 30,000 kcal/hr to 9,000,000 kcal/hr and operating on liquid fuel, with three flue passes and cooled combustion chambers, for the production of hot water for central heating. The boiler has cast-iron body made up of elements preassembled to be in the heating system and a steel casing painted using epoxy powder paint. Ferroli produces Cast Iron radiators of column type and of the highest output where the cross section and the surface design have been developed to optimize the radiation and convectional emissions. The high quality and reliability of these radiators are ensured by the technological facilities of Ferroli foundry. Ferroli products conform to UNI (Italian), DIN (German), DVGW (German), and NF (French) standards.

 

FERROLI (Atlas)

 

Atlas is a new high efficiency boiler where pass flueway producing hot water for heating purposes.
The boiler unit consists of cast iron parts assembled by steel rods and links, the shape of which has been particularly designed to achieve optimum fin distribution.
This ensures high thermal efficiency and consequently high energy savings.
The boiler is insulated by a thick layer of glass wool to reduce heat loss to the minimum.
Key:
1 Thermometer
2 Arrangement for automatic


GN2 N (Floor-Standing Cast-Iron Oil Boilers):


A High efficiency floor-standing heat generator fitted for jet burners on liquid and/or gas fuel, with partial flame reversal and one flue pass, cooled combustion chamber, for the production of hot water for central heating. GN4 N boilers are designed for use with fully pumped indirect heating systems with a working pressure of 6 bar
Construction:
- GN2 cast-iron boiler body made from pre-assembled elements (5 - 14) with steel cone inserts and boiler studs, insulated by a layer of rock wool lined by special tear-proof material.
- Steel casing painted by anaphoresis using epoxy powder paint and furnace-baked at 180°C.
Advantages of the GN2 N:
- Path of the flue gas that allows simple and silent operation.
- Cleaning and maintenance simplified by the possibility of accessing the boiler from the front.
- Very high efficiency and consequently reduced consumption and low operating costs.
- Fitted for two-stage burners.
- Wired for control unit.

 

FERROLI (GN4)

 

The GN4 N range of cast iron sectional boilers are available in 8 sizes from 200-650 kW and are suitable for use with pressure jet oil (28 or 35 sec) or duel fuel with the option of On/Off, High/Low or Fully Modulating burners.
The unique 3 pass flueway ensures maximum heat transfer and subsequent high operating efficiencies.
GN4 N boilers are designed for use with fully pumped indirect heating systems with a working pressure of 6 bar and a flow temperature of 95°C.
The Pre-wired Control Panel incorporates On/Off mains power switch, combined High/Low thermostat, High limit safety thermostat - manual reset and thermometer.
A choice of flow and return tapping configuration is available to suit the system application.
The installation of electrical and associated controls should be installed so that the burner is never allowed to fire when there is no demand for heat.
Provision should also be made to dissipate residual heat on plant shut down with the fitting of a pump

 

FERROLI (RSW)


The RSW series steel pressurised are pressurised combustion boilers with flame reversal in the combustion chamber and three flue gas passes The historical experience of Gruppo Ferroli S.p.A.
RSW boilers are also available 6,8,10 and 14 bars working pressure.
in the design and production of steel boilers has ensured the development of a solid and reliable appliance with performance that puts it at the top of its category of Gruppo Ferroli S.p.A.
The main technical aspects of the design are:
The careful design of the heat exchanger shapes, to ensure an optimum ratio between the combustion volumes and the heat exchange surfaces.
The materials used ensure the long life of the boiler



FERROLI (PEGASUS)


The PEGASUS F2 range of atmospheric natural gas-fired boilers is constructed of cast iron finned sections joined by steel nipples and tie rods.
Boilers are delivered to site fully assembled and incorporate an integral draught diverter giving all models a low profile silhouette.
PEGASUS F2 boilers are designed for use with fully pumped indirect heating systems up to a maximum working pressure of 4 bar and flow temperature of 82°C.
Standard controls and instruments include control thermostat, limit (manual reset) thermostat, lockout indicator lamp, ON/OFF switch, combined thermometer and altitude gauge.
The PEGASUS F2 boiler is a fully automatic ignition version that provides flame rectification monitoring. All gas, flow And return connections are situated at the rear of the boiler.
For ease of maintenance all cleaning of the flue ways and burner servicing is carried out from the front of the boiler, which means that the side clearances are kept to a minimum making this boiler particularly suitable for modular installations. The system electrical and associated controls should be installed so that the boiler is never allowed to fire when there is no demand for heat.




To download new catalogues for FERROLIdownlaod

 

                                                                                        Website : www.ferroli.com